Infortrend8-4
8.3 Supported Features
Fibre Chip
1Gbit Fibre Channel:
Fibre loops (1 Gbit FC-AL) comply with the following standards:
1. (FC-PH) X2.230:1994,
2. (SCSI-FCP) X3.269:1996,
3. (FC-AL-2) Project 1133-D rev.6.5,
4. (SCSI-2) X3.131-1994,
5. Supporting sustained 1 Gigabit/sec (100MB/sec) transfer rates.
6. Each Fibre loop can be independently configured for the
connection to host or drive.
2Gbit Fibre Channel:
1. Fibre Channel Arbitrated Loop (FC-AL-2) working draft, rev 6.4
2. Fibre Channel Fabric Loop Attach (FC-FLA) working draft, rev
2.7
3. Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)
working draft, rev 2.1
4. Fibre Channel Tape (FC-TAPE) profile, T11/98-124vD, rev 1.13
5. Support Fibre Channel protocol-SCSI (FCP-SCSI)
6. Support Fibre Channel Internet protocol (IP)
Multiple Target IDs:
Each 2Gbit channel configured as a host loop supports multiple
target IDs in the range of 0 to 125.
To Next Page
Loading...