Compaq External RAID Controller & Subsystem Infortrend - SCSI Channels Status

Terminal Screen Messages
6-7
6.7 SCSI Channel’s Status
Chl
SCSI channel number
Mode
Channel mode
RCCom Redundant controller communication channel
Host Host Channel mode
Drive Drive Channel mode
PID
IDs managed by the Primary Controller
* Multiple IDs were applied (Host Channel mode only)
(ID
number)
Host channel:
Specific IDs managed by the Primary Controller for host
LUN mapping
Drive channel:
Specific ID reserved for the channel processor on the
Primary controller
SID
IDs managed by the Secondary Controller
* Multiple IDs were applied (Host Channel mode only)
(ID
number)
Host channel:
Specific IDs managed by the Secondary Controller for
host LUN mapping
Drive channel:
Specific ID reserved for the channel processor on the
Secondary controller; used in redundant controller mode
NA No SCSI ID applied
DefSynClk
Default SCSI bus synchronous clock:
??.?M The default setting of the channel is ??.? MHz in
Synchronous mode.
Async. The default setting of the channel is Asynchronous mode.
DefWid
Default SCSI Bus Width:
Wide 16-bit SCSI
Narrow 8-bit SCSI
S
Signal:
S Single-ended
LLVD
FFibre