Infortrend
6-8
Term
Terminator Status:
On Terminator is enabled.
Off Terminator is disabled.
Diff The channel is a Differential channel. The terminator can
only be installed/removed physically.
CurSynClk
Current SCSI bus synchronous clock:
??.?M The default setting of the SCSI channel is ??.? MHz in
Synchronous mode.
Async. The default setting of the SCSI channel is Asynchronous
mode.
(empty)
The default SCSI bus synchronous clock has changed.
Reset the controller for the changes to take effect.
CurWid
Current SCSI Bus Width:
Wide 16-bit SCSI
Narrow 8-bit SCSI
(empty)
The default SCSI bus width has changed. Reset the
controller for the changes to take effect.
To Next Page
Loading...