Compaq External RAID Controller & Subsystem Infortrend - 4.6 SCSI Channel Status

Infortrend
4-5
4.6 SCSI Channel Status
Channel Mode:
Host Host Channel mode
Drive Drive Channel mode
Default SCSI Bus Sync Clock:
80.0M The default setting of this channel is
80.0MHz in Synchronous mode
Async The default setting of this SCSI channel
is in Asynchronous mode
Primary Controller SCSI ID Mapping:
* Multiple SCSI ID’s applied (Host
Channel mode only)
(ID number)
Primary Controller is using this SCSI
ID for host LUN mapping.
NA No SCSI ID applied (Drive Channel
mode only)
Secondary Controller SCSI ID Mapping:
* Multiple SCSI ID’s applied (Host
Channel mode only)
(ID number)
Secondary Controller is using this SCSI
ID for host LUN mapping.
NA No SCSI ID applied (Drive Channel
mode only)
CH0=Host =
SID=NA
CH0=Host PID
=*
SID=NA SXF=80.0M
SCSI ID
Channel
Mode
Channel
Number
Default Bus
Sync. Clock
Secondary Controller
SCSI ID Mapping