Infortrend8-16
To create LUN masks, select "View and Edit Host LUNs" from the
Main Menu, then select a host data path (channel-ID combination).
In active-to-active mode, selecting a host channel means selecting
either the Primary or the Secondary controller I/O path.
WWN Name List
Before mapping host LUNs, you may add host adapter port names
to a WWN name list to combine with a nickname given to each
adapter. Names will be recorded in controller NVRAM.
A named adapter (by location or the nature of host applications) can
be easily identified and later combined with filtering masks.
To Next Page
Loading...