Redundant Controller
10-29
Creating Primary and Secondary ID
Enter "View and Edit SCSI Channels." Press [ENTER] and select the host or
drive channel on which you wish to create Primary/Secondary ID.
Drive Channel
Host Channel
The configuration change will only take effect after controller reset.
Assigning Logical Drives to the Secondary Controller
A logical drive can be assigned to the Primary or Secondary controller. By
default, logical drives will be automatically assigned to the Primary
controller. It can be assigned to the Secondary controller if the host
computer is also connected to the Secondary controller.
Access "View and Edit Logical Drives" from main menu. Create a logical
drive by selecting members and then a selection box will appear on the
screen. Move cursor bar to "Logical Drive Assignments" and press [ENTER]
if you want to assign logical drive to the Secondary controller.
Logical drive assignment can also be changed after a logical drive is created.
Create a logical drive or choose an existing logical drive, then press
[ENTER] to see the logical drive menu. Choose "Logical Drive
To Next Page
Loading...