Terminal Operation
7-32
Disconnecting Support
Choose “Disconnect Support.” Choose Yes in the dialog box that
follows to confirm the setting.
Maximum Tag Count
Choose “Maximum Tag Count,” then press [ENTER]. A list of
available tag count numbers will appear. Move the cursor bar to a
number, then press [ENTER]. Choose Yes in the dialog box that
follows to confirm the setting.
IMPORTANT!
•
Disabling the Maximum Tag Count will disable the internal cache of a
SCSI drive.
Data Rate
This option is available in the drive channel configuration menus of
Fibre, ATA, or SATA-based subsystems. Default is “AUTO” and
To Next Page
Loading...