LCD Screen Messages
4-1
LCD Screen Messages
4.1 The Initial Screen
Status/Data Transfer Indicator:
Ready There is at least one logical drive or logical volume
mapped to a host ID/LUN.
No Host
LUN
No logical drive created or the logical drive has not
yet been mapped to any host ID/LUN.
❚❚❚❚❚❚❚❚❚❚❚❚
Indicates data transfer. Each block indicates
256Kbytes of data throughput.
4.2 Quick Installation Screen
Press [ENT] to create a logical drive, the controller will start
initialization of one logical drive with all the connected SCSI drives
and automatically map the logical drive to LUN 0 of the first host
channel. The “Quick Installation” can only be performed when
there is no Logical Drive.
Product Model
Firmware Version
Status/Data Transfer Indicator
SR2500 v3.**
Ready
Quick Logical
Drive Install
¯
Chapter
ChapterChapter
Chapter
4
44
4
To Next Page
Loading...