Infortrend
12-14
Follow the steps described in the previous section to "add" or "copy
& replace" SCSI disk drives and perform Logical Drive Expansion.
The 16.5GB logical drive has become a 25GB logical drive. Place the
cursor on that logical drive, and then press [ENTER].
From the menu, select "Partition Logical Drive." You will see that
the 25GB logical drive is composed of a 17GB partition and an 8.4GB
partition.
Follow the directions in chapter 5 and chapter 7 to map the new
partition to a Host LUN. The new partition must be "mapped" to a
host LUN in order for the HBA (host-bus adapter) to see it. Once
you have mapped the partition, reboot your Windows server. The
HBA should be able to detect an additional “disk” during the
initialization process.
To Next Page
Loading...