Infortrend
D-8
2-Line LCD
Power Supply Unstable or NVRAM Failed
Terminal
[0114] Controller ALERT: Power Supply Unstable or NVRAM Failed
Event Type
!Alert "Warning "Notification
What
Happens?
The output voltage drops below preset thresholds or NVRAM
component failure.
What to
Do?
Warning:
2-Line LCD
Memory Not Sufficient to Fully Support Current Config.
Terminal
[0107] Memory Not Sufficient to Fully Support Current Config.
Event Type
"Alert !Warning "Notification
What
Happens?
The installed size of memory does not support current configuration.
Try increase memory size.
What to
Do?
Notification:
2-Line LCD
Controller Initialization Completed
Terminal
[0181] Controller Initialization Completed
Event Type
"Alert "Warning !Notification
What
Happens?
Controller initialization completed
What to
Do?
2-Line LCD
Memory is Now Sufficient to Fully Support Current Config.
Terminal
[0187] Memory is Now Sufficient to Fully Support Current Config.
Event Type
"Alert "Warning !Notification
What
Happens?
Memory size has been expanded.
What to
Do?
2-Line LCD
NVRAM Factory Defaults Restored
Terminal
[0189] NVRAM Factory Defaults Restored
Event Type
"Alert "Warning !Notification
What
Happens?
Firmware settings have been restored to factory defaults. Options for
restoring defaults are not available to users and are only reserved for
qualified engineers.
What to
Do?
To Next Page
Loading...