Compaq External RAID Controller & Subsystem Infortrend - Page 324

Infortrend
D-24
2-Line LCD
High/Low +3.3V Voltage Detected (_.__)
Terminal
[3F21] Peripheral Device ALERT: +3.3V <upper/lower threshold>
Voltage Detected (_)
Event Type
!Alert "Warning "Notification
What
Happens?
The detected +3.3V voltage source is now higher or lower than the
preset voltage threshold.
What to
Do?
Check power supply condition, voltage threshold settings and contact
the your system supplier.
2-Line LCD
High/Low +5V Voltage Detected (_.__)
Terminal
[3F21] Peripheral Device ALERT: +5V <upper/lower threshold>
Voltage Detected (_)
Event Type
!Alert "Warning "Notification
What
Happens?
The detected +5V voltage source is now higher or lower than the
preset voltage threshold.
What to
Do?
Check power supply condition, voltage threshold settings and contact
your system supplier.
2-Line LCD
High/Low +12V Voltage Detected (_.__)
Terminal
[3F21] Peripheral Device ALERT: +12V <upper/lower> Voltage
Detected (_)
Event Type
!Alert "Warning "Notification
What
Happens?
The detected +12V voltage source is higher or lower than the preset
voltage threshold.
What to
Do?
Check power supply condition, voltage threshold settings and contact
your system supplier.