Compaq External RAID Controller & Subsystem Infortrend - Page 335

Event Messages
D-35
Controller Self Diagnostics:
2-Line LCD
CPU Temp Back Non-Critical
Terminal
[3fa3] CPU <high/low threshold> Temperature Back to Non-Critical
Levels
Event Type
"Critical "Warning !Notification
What
Happens?
CPU operating temperature back to non-critical level.
What to
Do?
Press <ESC> to clear the message.
2-Line LCD
Board_ Temp Back Non-Critical
Terminal
[3fa3] Board_ <high/low> Temperature Back To Non-Critical Levels
Event Type
"Critical "Warning !Notification
What
Happens?
Board_ temperature back to non-critical level.
What to
Do?
Press <ESC> to clear the message.
2-Line LCD
+3.3V Back to Non-Critical
Terminal
[3fa1] +3.3V <high/low> Voltage Back within Acceptable Limits
Event Type
"Critical "Warning !Notification
What
Happens?
+3.3V voltage source back within acceptable limits.
What to
Do?
Press <ESC> to clear the message.
2-Line LCD
+5V Back to Non-Critical
Terminal
[3fa1] +5V <high/low> Voltage Back within Acceptable Limits
Event Type
"Critical "Warning !Notification
What
Happens?
+5V voltage source back within acceptable limits.
What to
Do?
Press <ESC> to clear the message.
2-Line LCD
+12V Back to Non-Critical
Terminal
[3fa1] +12V <high/low> Voltage Back within Acceptable Limits
Event Type
"Critical "Warning !Notification
What
Happens?
+12V voltage source back within acceptable limits.
What to
Do?
Press <ESC> to clear the message.