Infortrend
3-8
3. Login as “root” and there is no password for the first login. Press Enter
to skip password entry.
4. Use the “put” command to transfer the following files:
put grm.htm
put grm.jar
put grem.htm
put grem.jar
5. Proceed to install Java Run-time environment from the CD (If the
management station is a P4-based computer, it is required to install
Java JRE version1.3.1).
6. Reset the RAID subsystem using the Reset command for the
configuration to take effect.
5. Starting the Manager:
Start your web browser and enter the IP address assigned to the
controller followed by “grm.htm” as your URL (e.g.,
http://xx.xx.xx.xx/grm.htm).
Enter the IP address followed by “grem.htm” to start Event Monitor.
To Next Page
Loading...