vii
Chapter 6 Terminal Screen Messages
6.1 The Initial Screen............................................................................................1
6.2 Main Menu.......................................................................................................2
6.3 Quick Installation............................................................................................2
6.4 Logical Drive Status .......................................................................................4
6.5 Logical Volume Status...................................................................................5
6.6 SCSI Drive Status ...........................................................................................6
6.7 SCSI Channel’s Status ...................................................................................7
6.8 Controller Voltage and Temperature ............................................................9
6.9 Viewing Event Logs on the Screen.............................................................10
Chapter 7 Terminal Operation
7.1 Power on RAID Enclosure .............................................................................1
7.2 Caching Parameters.......................................................................................1
Optimization Modes ...........................................................................................1
Optimization Mode and Stripe Size....................................................................3
Optimization for Random or Sequential I/O .......................................................3
Write-Back/Write-Through Cache Enable/Disable ............................................3
7.3 Viewing the Connected Drives......................................................................4
7.4 Creating a Logical Drive.................................................................................5
Choosing a RAID Level:.....................................................................................6
Choosing Member Drives: .................................................................................6
Logical Drive Preferences:.................................................................................6
Maximum Drive Capacity:..................................................................................6
Assign Spare Drives: .........................................................................................7
Disk Reserved Space ........................................................................................7
Logical Drive Assignments:................................................................................7
Write Policy........................................................................................................7
Initialization Mode ..............................................................................................8
Stripe Size..........................................................................................................8
7.5 Creating a Logical Volume...........................................................................10
7.6 Partitioning a Logical Drive/Logical Volume .............................................11
7.7 Mapping a Logical Volume to Host LUN ....................................................13
7.8 Assigning Spare Drive, Rebuild Settings...................................................15
Adding Local Spare Drive ................................................................................15
Adding a Global Spare Drive............................................................................16
7.9 Viewing and Editing Logical Drive and Drive Members ...........................16
Deleting a Logical Drive ...................................................................................17
Deleting a Partition of a Logical Drive..............................................................17
Assigning a Name to a Logical Drive...............................................................17
Rebuilding a Logical Drive ...............................................................................18
Regenerating Logical Drive Parity....................................................................19
Media Scan ......................................................................................................19
Write Policy......................................................................................................20
7.10 Viewing and Editing Host LUNs..................................................................21
Viewing or Deleting LUN Mappings .................................................................21
Edit Host-ID/WWN Name List..........................................................................21
Pass-through SCSI Commands.......................................................................21
7.11 Viewing and Editing SCSI Drives................................................................22
Scanning New Drive.........................................................................................23
Slot Number .....................................................................................................23
Drive Entry .......................................................................................................23
Identifying Drive ...............................................................................................23
To Next Page
Loading...