Front Panel Operation
5-9
The Off-Line Mode:
The controller will start to initialize the
array parity if using the “Off-line”
mode. Note that if NRAID or RAID 0
is selected, initialization time is short
and completes almost immediately.
The logical drive’s information displays
when the initialization process is
completed. If “On-line” mode is
adopted, array information will be
displayed immediately.
Initializing090%
Please Wait!
LG=0 RAID5 DRV=3
2012MB GD SB=0
LG=0 Initializat
Ion Completed
To Next Page
Loading...