EasyManua.ls Logo

Comprag A55 - Storage and Disposal; Storage Conditions; Disposal of Oils and Process Condensate

Default Icon
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Version 4.5
The safety-relief valve of the
separator tank is activated.
The separator is dirty.
Perform maintenance by
replac- ing the separator.
The pressure is too high
(over13 bar).
Set the working pressure
below 13 bar.
7. Storage and disposal
7.1 Storage conditions
The compressor should be kept at a temperature between -20° and +35°С with max. 85%
relative humidity.
7.2 Disposal of oils and process condensate
Used oils, greasy lters and separators should be recycled in a sealed container and dis-
posed of at a local recycling or disposal facility. Do not allow precipitation to mix with oil.
Process condensate contains oil. Local environmental regulations govern the degree of
contamination of condensate discharge into sewers. Use process condensate separators to
separate oil and further impurities from condensate.
Replaceable components of a process condensate separator should be disposed of in the
same way as greasy wiping cloths.

Table of Contents

Related product manuals