(1) Example: Setting Type of Work is employee, pay period is Monthly,
Pay ending day is 20.
After the pay ending day, thefirst punch will on the front side of the time card in
the 1’st row. You can punch IN/OUT as many times as required per day.
11
a. Setting “Type of Work”
Press the [F] button, and position
the “▲” under the “PRINT
FORMAT” mark. The “Type of work”
flashes (The flashing means it can
be changed).
F
+
E
PRINT
FORMAT
Such as example, press the [E]
button because the type of work is
not to be changed.At the same
time, the flashing changes from
“Type of Work” to “Pay Period”.
b. Setting “Pay Periods”
Such as example, press the [E]
button because the Pay period is
not to be changed.At the same
time, the flashing changes from
“Pay Period” to “Pay ending day”.
F
E
PRINT
FORMAT
c. Setting the “Pay ending
day”
Press the [+] or [-] button to
Set at “20” and press [E] button
F
+
E
PRINT
FORMAT
At the same time, the LCD
screen only display “▲” under
the “PRINT FORMAT” mark.
d. If you want to set another
function, press the [F] button to
continue setting.
If you finished setting the
functions, replace the cover and
lock it.
TO PLACE AN ORDER CALL: 866-487-4751
OR VISIT: WWW.TIMECLOCKEXPERTS.COM
To Next Page
Loading...
