(2) Example: Setting Type of Work is employee, pay period is Weekly,
Pay ending day is Friday.
Today
Date May 2 May 3 May 4 May 5 May 6 May 7 May 8
Day of week Wed. Thu. Fri. Sat. Sun. Mon. Tue.
Code 00 01 02 03 04 05 06
After the pay ending day, your first punch will on the front side of the time card
in the 1’st row; you can punch IN/OUT as many times as required per day.
12
a. Setting “Type of Work”
Press the [F] button, and position
the “▲” under the “PRINT
FORMAT” mark. The “Type of
work” flashes (The flashing
means it can be changed).
F
+
E
PRINT
FORMAT
Such as example, press the [E]
button because the type of work is
not to be changed.At the same
time, the flashing changes from
“Type of Work” to “Pay Period”.
b. Setting “Pay Period”
Press the [+] or [-] button to
Set at “2” and press [E] button.
At the same time, the flashing
changes from “Pay Period” to
“Pay ending day”.
F
+
E
PRINT
FORMAT
c. Setting the “Pay ending
day”
Press the [+] or [-] button to
set at “02” and press [E] button.
F
+
E
PRINT
FORMAT
At the same time, the LCD
screen only display “▲” under
the “PRINT FORMAT” mark.
d. If you want to set another
function, press the [F] button to
continue setting.
If you finished setting the
functions, replace the cover and
lock it.
TO PLACE AN ORDER CALL: 866-487-4751
OR VISIT: WWW.TIMECLOCKEXPERTS.COM
To Next Page
Loading...
