4
Operation
Operation l 4-5
Once power is turned on, this screen is dis-
played for 5 seconds while the control
goes through self-checking.
Once power is turned on and screen 1 is
displayed for 5 seconds, this screen is dis-
played for another 3 seconds. It shows the
dryer model number for which the control
is configured.
After the model number is displayed, this
screen flashes for 1 second and displays
the control board software version.
After the control version is shown, the
screen flashes again for 1 second and dis-
plays the display board software version.
Indicates configuration as a central dryer.
Shows the regeneration air setpoint and
actual temperature. The setpoint can not be
changed from this screen; it is shown only
as a reference.
Screen
SCREEN 1
SCREEN 2
SCREEN 3
SCREEN 4
SCREEN 5 (Default Screen)
SCREEN 6
Pr
Function
Control Function Descriptions
up
CP
600
v2.0
3.00
C
v2.0
3.00
d
350
350
2
CNT
DRY
1
To Next Page
Loading...
