What is the Carousel Plus W Series
Dryer?
The Carousel Plus W Series dehumidifying dryer produces low-dewpoint air that
removes moisture from hygroscopic plastics. The dryer pulls moist air from a
drying hopper and circulates it through a dehumidifying desiccant wheel. The
dryer then circulates the air through the material in the hopper.
The dryer’s closed-loop design ensures a continuous supply of dehumidified air
while preventing contamination from moisture in the plant.
Typical Applications
1 Dryer on the floor, single hopper (with HTC Hopper Temperature Control
package) on a floor stand.
2 Dryer on the floor, multiple hoppers in central configuration (ResinWorks) with
separate heat source for each hopper.
The Carousel Plus W Series Dryer can be used successfully in applications that
require:
• A contamination-free drying environment.
• A constant flow of dehumidified air.
2-2 l Descript ion
NOTE: The W600 - 5000 pro-
vides no heat to the process
air. A separate heat source is
required at the hopper(s) inlet
to heat the air to the desired
drying temperature.
✐
(continued)
To Next Page