6
Troubleshooting
Replacing Fuses
1 Disconnect and lockout the main power supply.
2 Open the electrical enclosure door.
3 Check the fuse with an ohmmeter. If necessary, pull the fuse out and replace
it with a fuse of the same type and rating.
Fuse Blocks
To locate the appropriate fuse
and replacement part, refer to
the wiring diagrams that
came with your dryer.
IMPORTANT: Always refer
to the wiring diagrams that
came with your dryer to
locate specific electrical
components. Illustrations in
the User Guide are intended
to be representative only.
Troubleshoot ing l 6-23
To Next Page
Loading...
