4-16 l Opera tion
To Stop Drying
1 Press the STOP button. The Stop LED blinks red.
• The blowers continue running for a few minutes
to cool the heaters.
2 Be sure to disconnect and lockout the main power if you have stopped the
dryer to perform maintenance or repair.
IMPORTANT: Do not use the main power switch to stop the dryer. Turning off power to the
control and dryer during normal operation prevents the necessary cool-down period, and
can trigger the shutdown/high temperature alarm during your next drying cycle.
CAUTION: Improper shut down can cause damage to your dryer.
NOTE: Turn off the ResinWorks or HTC and allow the heaters to cool (3 to 5 minutes)
before turning off the dryer.
✐
To Next Page
Loading...
