Contec SBC Series User Manual

7. BIOS Setup
62
PC-686BX(NLX)-LV, PC-686BX(NLX)-LVV
CPU Internal/External Cache
Two categories of high speed memory access are provided. However, the access
methods depend on the CPU and chipset.
Enabled Enable cache
Disabled Disable cache
CPU L2 Cache ECC Checking
This setting enables or disables ECC checking of the CPU’s L2 cache.
Selection options: Enabled, Disabled
Quick Power On Self Test
This setting allows a faster power-on self test (POST) to be performed when the
computer is turned on. If this option is enabled, the BIOS shortens or skips some of
the checks performed by the POST.
Enabled Enable quick POST
Disabled Standard POST
Boot Sequence
The BIOS selects the device from which to load the operating system (OS) based on
the sequence selected by this option.
Selection options: Floppy, LS/ZIP, HDD, SCSI, CDROM, Disabled
Swap Floppy Drive
If two floppy drives are installed on the system, the logical drive names may be
swapped.
Selection options: Enabled, Disabled
Boot Up Floppy Seek
The BIOS performs a disk drive seek during startup.
Disabling this option speeds up the startup sequence.
Selection options: Enabled, Disabled
Boot Up NumLock Status
Selects the initial NumLock state at startup.
Selection options: Enabled, Disabled

Contec SBC Series Specifications

General

Brand	Contec
Model	SBC Series
Category	Motherboard
Language	English