7. BIOS Setup
76
PC-686BX(NLX)-LV, PC-686BX(NLX)-LVV
PnP/PCI Configuration Setup
This section describes the setup for the PCI bus system. PCI is a peripheral device
interface (PC interconnect) that enables I/O devices to operate at speeds close to the
CPU execution speed for communication between the CPU and specific components.
This section describes a number of technical settings. However, the default values
should only be modified by advanced users who fully understand the system.
PNP OS Installed
Select "Yes" if the operating system supports plug & play (for example, Windows 95).
Selection options: Yes, No
Resource Controlled by
The Award plug & play BIOS automatically configures all boot and plug & play
compatible devices. If "Auto" is selected, the BIOS allocates resources automatically
and therefore all the interrupt request (IRQ) and DMA fields are disabled.
Selection options: Auto, Manual
To Next Page
Loading...
Need help?
General
