Contec SBC Series User Manual

7. BIOS Setup
PC-686BX(NLX)-LV, PC-686BX(NLX)-LVV
77
Reset Configuration Data
Normally, leave this field disabled. Only enable the field to reset the extended
system configuration data (ESCD) in cases such as the when you wish to terminate the
setup because the system has been reconfigured due to installing a new add-in
component and this results in a major conflict that prevents the operating system from
booting.
Selection options: Enabled, Disabled
IRQ n Assigned to
When controlling resources manually, assign each system interrupt to one of the
following types of device:
Legacy ISA devices which comply with the original PC AT bus specification and
require a specific interrupt (for example, serial port 1 requires IRQ4).
PCI/ISA PnP devices designed to work with the PCI or ISA bus architecture that
comply with the plug & play standard.
Selection options: Legacy ISA, PCI/ISA PnP
DMA n Assigned to
When controlling resources manually, assign each system DMA channel to one of the
following types of device:
Legacy ISA devices which comply with the original PC AT bus specification.
PCI/ISA PnP devices designed to work with the PCI or ISA bus architecture that
comply with the plug & play standard.
Selection options: Legacy ISA, PCI/ISA PnP

Contec SBC Series Specifications

General

Brand	Contec
Model	SBC Series
Category	Motherboard
Language	English