View Error messages and logs. Runtime errors are reported immediately
on your screen. You can also open the Status tab and Log tab for viewing
error messages.
View information about the scanner device in relation to firmware and
hardware revisions. Open the Info tab.
Install new firmware – You download new firmware to a folder on your
machine. Then right click on the scanner icon, select Advanced Options >
Update Scanner Firmware to install it on your scanner.
Initiate a scan of the system’s hardware bus for re-establishing the
interface. Right click on the scanner icon, select Advanced Options >
Rescan Hardware Bus.
Assign/reassign applications to the scanner’s one-touch-scan
buttons, or disable the one-touch-scan buttons altogether. Open the One-
Touch tab to make settings.
Set Automatic Power functions. Timer and Enter Sleep mode
automatically (after idle time) options.
Set up your scanner so it can be shared by user PC’s on the network.
Open the Scan to Net tab to make settings.
Set up your scan software so it can access shared scanners on the
network. Open the Scan to Net tab to make settings. See also Installation -
Share the scanner on the LAN.
Launch the scanner maintenance program. Right click on the scanner
icon, select Launch Scanner Maintenance.
Launch the WIDEsystem on-line help. To find instructions on trouble
shooting and using WIDEsystem with your scanner. Open WIDEsystem
and press the F1 key.
WIDEsystem program control interface
To Next Page
Loading...
