Genus G1 MARK II Users Manual
UM3010-2
Module Options
The Genus G1 MARK II Terminal provide UPS, Modem and WiFi Module options.
UPS Module. The 2050-012 module provides
backup power to the Genus G1 terminal and
integrated readers and communications options in
the event of a main power failure and brownout
conditions.
Battery. The 2050-012 module uses a Ni-Cd 8 cell
arrangement (9.6V @ 1000 mAh) to provide DC
backup power to the processor and I/O modules. It
has a wide charging voltage range (+15VDC to
+24VDC unregulated). The battery will have a full
charge after 20 hours at a trickle charge rate.
Modem Comm Module. The 2042-300 module
provides communication level conversion from a
standard Telco line to RS232 levels for Genus G1.
56K Baud Modem. The modem is a 56K baud Auto
Answer/Auto Connect modem which connects via
the RJ11 Telco Port (Modem Host). It features Data
Mode v.92
(57600 BPS) and supports enhanced “AT”
commands.
WiFi Comm Module. The 3046-200
communications module provides LAN and Internet
connectivity with the standard Ethernet interface to
applications. The module is interoperable with
industry standard 802.11 LAN and Internet
connectivity and provides advanced security
standards such as WEP and WPA. It provides a
complete, reliable transparent wireless connection
between a G1 Terminal and a network host via an
RF access point.
Revision B 10-30-07 11
UPS 2050-012
Modem 2042-300
WiFi 3046-200
To Next Page
Loading...