Genus G1 MARK II Users Manual
UM3010-2
Terminal Info Prompt
The Genus G1 Terminal stops and waits at the ‘Terminal Info’ prompt for keypad entry, as
shown below, unless a PIN number has been setup then the terminal will request a PIN:
Note: Enter PIN prompt will only appear if PIN number has been setup in
“SETUP PIN” from main menu during a previous offline session.
Revision B 10-30-07 16
TERMINAL INFO?
<UP><DWN><E>
ENTER PIN:
<E-C>
No PIN set
PIN previously set
To Next Page
Loading...
