Convaid Rodeo - Chair Set Up & Adjustment; Preparing the Chair for Use

10
CONVAID USER’S GUIDE
How to Remove Chair from Box
1. Place box at on the oor.
2. Verify that package is in good shape and that no damage has occurred during shipping.
3. Remove the chair from the packaging material.
4. Check to make sure that your order is complete.
Preparing the Chair for Use
Once you have all components as ordered, the directions for use in this User’s Guide will guide you
through the process of preparing the chair for use.
Convaid recommends the initial tting, adjustments, and setup take place with the help of your
Convaid Representative and/or Convaid Service Dealer. However, if the instructions contained in this
user’s guide are followed carefully, a caregiver or attendant will be able to set up and assemble the
chair.
Tools Required
• 5/32” Allen wrench
• 7/16” Wrench
• 3/8” Wrench
• Phillips Screwdriver
Chair Set Up & Adjustment
Contents in the Box
List of items included in the box:
• Mobility base and seating module
• Set (pair) of rear wheels
• User’s Guide
• Accessories as ordered
• 5/32” Allen wrench