Convaid Rodeo - Footbox Cover

To Next Page

To Previous Page

CONVAID USER’S GUIDE

Footbox Cover

To install footbox cover to one-piece footplate:

1. Attach the footbox cushion to the footbox base using the Velcro

. Fig. 81

NOTE: Make sure the front ap of the box cushion is facing forward when attaching the

cushion.

2. Secure the cushion to the footbox by wrapping the front ap of the cushion underneath the

footbox. Fig. 82

3. After securing the cushion to the footbox, attach the cover by wrapping it over the footbox base.

Fig. 83

4. Attach the footbox cover to the footplate using the provided Velcro

strip. Fig. 84

Fig. 81 Footbox cushion

Fig. 82 Cushion front ap

Fig. 84 Footplate with Velcro

Fig. 83 Footbox cover

Other manuals for Convaid Rodeo