26
CONVAID USER’S GUIDE
Rear Tire Installation
Fig. 87 Fig. 88
To install, slide wheel onto rear axle and push with ball of hand until it clicks into place.
Fig. 89 Fig. 90
Anti-Shimmy
In the event that the front wheels develop a shimmy, use a wrench (3/4”) to tighten the stem nut.
Adjust the stem nut clockwise until the shimmy disappears. Fig. 89 & 90
CAUTION: Always make sure the wheels are installed properly. You will hear a “click”
when the wheel lock into place. Pull on wheel to conrm installation.
To Next Page
Loading...
