54
CONVAID USER’S GUIDE
Tools Required
• Tools needed include 3⁄8”, 7⁄16”, 3⁄8” or 2 adjustable wrenches with 3⁄4” capacity, Phillips head
screwdriver 5/32”
• Allen wrench (included)
Spare Parts
If you need any spare parts for your chair, please visit or call the Convaid service dealer you purchased
this chair from. If the part is not under warranty, you will receive an estimate of the cost and, if
necessary, shipping instructions for the return of the chair for repairs.
Functional Tests
All four wheels should make contact with the oor. With the chair empty, push it forward on a smooth
level surface with enough momentum to travel six feet (2 m). The chair should not veer to the left
or right more than six inches (150 mm). Wheels should be free running. Following the fold/unfold
instructions; the chair should fold/unfold smoothly without undue effort. All fasteners should be
secure. Fasteners on moving joints should not be overtight. Seat fabric should not be wide-stretched or
sagging. Positioning accessories should be correctly adjusted and secure.
EU Authorized Representative
R82 A/S
Parallelvej 3,
8751 Gedved, Denmark
Or contact Convaid Customer Service at
844 US Mobility (844-876-6245) (+1-310-618-0111) or
Email: convaidsales.us@etac.com
International Email: international.convaid.us@etac.com
IMPORTANT INFORMATION
Convaid Service Dealer
Please record the Convaid Dealer from which you purchased your chair:
Company: _____________________________________________________________________________
Address: ______________________________________________________________________________
Phone: _____________________________Website: __________________________________________
Contact: ______________________________Email: __________________________________________
Serial #: ______________________________________________________________________________
To Next Page
Loading...
