Plato Complete Guide V1.3.0
Convert Technologies 34
4.1. Adding a Turntable
The turntable must be connected to the AUX/Phono input.
To assign a turntable
1. From the Main Drawer Feature
Menu, select External Source, and
open the SOURCE CONTROL tab.
2. Long Press the UNASSIGNED icon
above the AUX/Phono text.
The configuration option screen for
this input is displayed.
3. To change image icon:
touch the image in the top left hand
corner of the configuration screen.
The Select Image dialog screen is
displayed.
4. Select the turntable image.
5. To change the name:
Press on the text area after ‘Name’.
(Note: screen image of keyboard may
vary depending on type of Android
device you are using.)
6. Use
the
or
the Delete key
to delete the existing text.
7. Type in new text.
8. Select Done.
To Next Page
Loading...