Converteam MVS3007 - Page 57

ALSPA PROFIBUS Field Bus Coupler 7. Menu 74 Parameters
(09/06) Technical Manual Page 7-13
Par No Name Default Range Attrib. Comment
P74.72 FBC1 Tx Word 2 Ptr. 00.00 0-99.99 E.N *
P74.73 FBC1 Tx Word 2 Scale 0 0-15 E.L *
P74.74 FBC1 Tx Word 3 Ptr. 00.00 0-99.99 E.N *
P74.75 FBC1 Tx Word 3 Scale 0 0-15 E.L *
P74.76 FBC1 Tx Word 4 Ptr. 00.00 0-99.99 E.N *
P74.77 FBC1 Tx Word 4 Scale 0 0-15 E.L *
P74.78 FBC1 Tx Word 5 Ptr. 00.00 0-99.99 E.N *
P74.79 FBC1 Tx Word 5 Scale 0 0-15 E.L *
P74.80 FBC1 Tx Word 6 Ptr. 00.00 0-99.99 E.N *
P74.81 FBC1 Tx Word 6 Scale 0 0-15 E.L *
P74.82 FBC1 Tx Word 7 Ptr. 00.00 0-99.99 E.N *
P74.83 FBC1 Tx Word 7 Scale 0 0-15 E.L *
P74.84 FBC1 Tx Word 8 Ptr. 00.00 0-99.99 E.N *
P74.85 FBC1 Tx Word 8 Scale 0 0-15 E.L *
P74.86 FBC1 Tx Word 9 Ptr. 00.00 0-99.99 E.N *
P74.87 FBC1 Tx Word 9 Scale 0 0-15 E.L *
P74.88 FBC1 Tx Word 10 Ptr. 00.00 0-99.99 E.N *
P74.89 FBC1 Tx Word10 Scale 0 0-15 E.L.*
Setting P74.03 to its default will signify the use of the old type of
PROFIBUS FBC. Any other value will imply the use of the new
type.
Where for Attributes:
N - ENTER has to be pressed to update
O - Operator Accessible
E - Engineer Accessible
L - List Parameter
S - Stop Drive To Edit
R - Read Only
∗
This parameter requires a PROFIBUS reconfiguration (P74.05 = 1) before
changes will take effect.