Coredy VM3311 - Recharging the Battery Using a USB AC Adaptor

On a Macintosh screen, click the “COREDY
RECORDER” ejection icon on the Finder.
You can charge the rechargeable battery or use the
Coredy recorder by connecting it to an AC outlet using a
USB AC adaptor (not supplied). This is useful when you
want to record for a long time.
When the battery is fully charged, the battery indicator will
indicate “ ”. When you charge the Coredy recorder for
the first time, or when you have not used the Coredy
recorder for a long time, charge the rechargeable battery
until the “ ” indicator appears on the display. It takes
about 3 hours and 30 minutes to fully charge an
exhausted battery.
1.4.3 Recharging the battery using a USB AC adaptor
③ Disconnect the USB connecting cable from the
Coredy recorder and the USB port of the computer.
SAVE
REC
12