IDC Pro 255 Service Manual
Publication Number: 621058649SER - 34 - © 2016, Cornelius Inc.
UPDATING SOFTWARE REVISIONS
The unit can be updated as new versions of software become available, they may be installed on the unit by perform-
ing the procedure in Table 23.
4
Press the Shutdown button to start the shutdown
process or press the Restart button to restart the
unit.
Figure 69.
5
Red/Black button on back of screen shown in Figure 70. To prompt screen push button & select Restart or
Shutdown. To hard shutdown hold for 5-7 sec until screen get blank. Wait for 10 sec and press once to restart.
Table 23.
Step Action
1 Enter Service mode, as described in “Service Mode” section on page 21.
2 Open the display panel.
3
On the back of the display, unplug the USB con-
nection as shown in Figure 70 to the ADA panel
and plug in the USB stick with the software update
loaded on it.
Figure 70.
Table 22.
Step Action
To Next Page
Loading...
