FEATURES
- 13 -
COROB™ D600 - D700 - D800TX
2.5 Intended use
The machine is intended for professional use to dispense colorants in small, medium and large point of sales or
professional paint stores.
The machine must be used only with cans within the limits set forth in chapter 2.4 (Usable cans), with the
colorants specied in the table of chapter 8.1 (Technical data) and according to the procedures described in this
manual.
Any use of the machine other than that stated, which cannot be implied or deduced from this manual, is to be
considered improper and unintended therefore it voids any manufacturer’s liability arising from non-compliance
with these requirements.
2.6 Identifying information
The machine has an identication plate (chapter 3.4) indicating:
1. Manufacturer’s name.
2. CE and WEEE marking.
3. Machine model.
4. Year of manufacture.
5. Serial number.
6. Electrical specications.
Do not remove or tamper with the identication plate in any way.
To Next Page
Loading...
