TECHNICAL SPECIFICATIONS
- 47 -
COROB™ D600 - D700 - D800TX
8 TECHNICAL SPECIFICATIONS
8.1 Technical data
D600 TE D600 TI D700 D800TX
Power supply
Single-phase 220 - 240 V ~ ± 10%
Single-phase 100 - 110 V ~ ± 10%
Other power supplies available upon request
Frequency 50/60 Hz
Fuses* F 10 A
Maximum power absorbed* 650 W
650 W (up to 24 circuits)
800 W (from 25 to 32 circuits)
Noise level Level of equivalent acoustic pressure: < 70 dB (A)
Environment working
conditions**
Temperature: between 10°C (50°F) and 40°C (104°F)
Relative humidity: between 5% and 85%, without condensation
Vibrations
The machine does not transmit vibrations to the oor that may compromise
the stability and precision of any nearby equipment.
Dispensing technology gear pump
Dispensing system simultaneous
Dispensing center External Internal \ External
Type of canisters all-purpose (POM acetalic resin)
Type of valves electrovalves
***
Machine
639 lb (290 kg) (16)
772 lb (350 kg) (24)
661 lb (300 kg) (16)
904 lb (410 kg) (32)
Packed machine
728 lb (330 kg) (16)
882 lb (400 kg) (24)
750 lb (340 kg) (16)
992 lb (450 kg) (32)
* Not including connected auxiliary devices. The power information is purely indicative, and depends strictly on the machine conguration.
** The environment working conditions are strictly related to the type of colorants used (ask for information from the paint manufacturer). The
data shown are valid for the machine only.
*** Data refer to the machine with empty canisters and without accessories.
Standard circuit LAB circuit HF circuit
Flow rate (theoretical at 100 rpm) 0.5 l/min 0.161 l/min 0.952 l/min
Minimum dispensed quantity****
1/384 US oz
(0.077 ml)
1/1152 US oz
(0.026 ml)
1/192 US oz
(0.154 ml)
Theoretical resolution**** 0.00214 cc/step 0.000713 cc/step 0.00428 cc/step
**** Values highly affected by the nature of the colorants and their rheological properties.
To Next Page
Loading...
