TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - FERTI 1500/2150/2400/2800/3200
TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - CX 1500/2150/2400/2800/3200
TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - CX 1500/2150/2400/2800/3200
TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - CX 1500/2150/2400/2800/3200
TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - CX 1500/2150/2400/2800/3200
Cod. MNenA055CER05 Rev. 05/05.2018 © A
rex S.p.A.
STEP OPERATION
Attach the parking wheels:
s attach the wheels to the base of the machine’s
chassis
3
s insert the pin in the slot provided on the leg and
tighten the handwheel
s Check that the wheels are securely fastened to the
chassis.
4
Rest the machine on the ground.
s Disconnect the bottom lift bars on the tractor from the bottom hitch points on the fertilizer spreader.
5
s Disconnect the attachment to the third point.
6
s Move the tractor forwards around 30 cm so as to create enough space to facilitate disconnection of the drive
shaft and the power supply lines.
s Engage the parking brake and make sure the tractor cannot start or move accidentally.
7
s Turn off the tractor’s engine and remove the ignition key.
s Disconnect the drive shaft from the tractor’s PTO.
8
s Attach the drive shaft to the support provided.
s
Disconnect the hydraulic hoses.
9
s
Attach the hydraulic distributor to its support.
6-18
06‐USINGTHEMACHINE
To Next Page
Loading...
Need help?
General