TWIN DISC CENTRIFUGAL FERTILIZER SPREADER - CX 1500/2150/2400/2800/3200
3-9
WARNING!
DonotremoveorhidetheDANGER,WARNING,CAUTIONorINSTRUCTIONstickers.Replaceany
DANGER,WARNING,CAUTIONstickersthatareillegibleormissing.Intheeventoflossordama‐
ge,sparestickers areavailablefromthemanufactureroryourlocal dealer.Thepurchasermust
contactthemanufacturerortheir
localdealertoensurethestickersarereplacedintheoriginal
position.
3.7.3.
CHECKSDURINGUSE
s
After having engaged the PTO, check the operating speed. Never exceed 540 rpm.
s Never spread ferrous materials, stones, rocks, glass and similar material, as these may cause serious or very serious damage to
things or people.
s When moving the machine, never leave the PTO engaged.
s The area where the machine is used is considered a “DANGERZONE”, above all for people who are not trained in operating the
machine. Operators must be trained regarding the requirements in force on occupational health and safety.
s Be aware of any people or animals within the machine’s range of operation: this is important when working on areas or roads that
are accessible to the public.
s When a person is “exposed”, i.e. inside a “DANGERZONE”, the operator must immediately stop the machine and ask the person
to move away from the machine.
s When operating the machine, the operator must be in a position such as to have complete control of the entire machine and be
able to respond at any time and in any circumstances.
s Never approach the machine during operation; switch off the tractor’s engine, remove the keys from the ignition and only then
approach the machine.
3.8.
TERMSANDSYMBOLSONTHESTICKERS
The machine has been designed and manufactured adopting the statutory safety requirements for the protection of the health and
safety of operators, the public and the environment. The terms and symbols on the stickers affixed in various positions around the
machine are intended to recall the operator’s attention.
If damaged, lost or affixed to components that are removed for replacement, they must be replaced with originals ordered from the
manufacturer and applied in the exact same position as specified in the manual.
03‐SAFETYANDPREVENTION
To Next Page
Loading...
Need help?
General