Cotech FT0203 - Thermometer;Hygrometer

13
ENGLISH
If thevalues lie outside of these limits, they can be adjusted on theindoor unit.
See theCalibration section.
Place thesensor close to theindoor unit, and
leave it lying there for approx. 30minutes
so that thetemperature stabilises. Read
thevalues for thetemperature and humidity,
and compare these. Thetemperature values
should be within 1°C (accuracy ±0.5°C)
and thehumidity values should be within 6%
(accuracy ±3%).
If you have any additional thermometers/
hygrometers connected, press [ CHANNEL/+ ]
(2) repeatedly to switch between these.
Thermometer/hygrometer