EasyManua.ls Logo

Cotech FT0203 - User Manual

Cotech FT0203
176 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Important:
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg om
at du forstår dem, før du tar produktet ibruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette Bedienungs-
anleitung durchlesen und aufbewahren.
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Trådlös väderstation med USB
Trådløs værstasjon med USB
Langaton sääasema jossa USB
Funk-Wetterstation mit USB
Art.no Model
18-3676 FT0203
36-7334 FT0203
Wireless Weather Station
with USB
Ver. 20180810
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung

Table of Contents

Questions and Answers

  • A
    Anthony PonceJul 25, 2025
    What to do if Cotech Weather Station wireless sensors are not transmitting data?
    • C
      Colleen CarrollJul 25, 2025
      If your Cotech Weather Station's wireless sensors aren't transmitting data, and the display shows “--.-”, try the following: * Press and hold [ CHANNEL/+ ] for 3 seconds, then select the sensor to reconnect using [ CHANNEL/+ ] or [ HISTORY/? ], and confirm with [ MODE/SET ]. * Ensure the sensors are between 1.5 m and 30 m from the indoor unit. * Try placing the sensors higher up. * Check that the sensors’ displays are working or LED indicators are flashing every 60 seconds. * Insert new batteries into the sensors, using lithium batteries in cold climates. * Check the batteries in the indoor unit. * Ensure the radio signal isn't interfered with by metal constructions. * Move the indoor unit away from other electronic devices like routers, computers, and televisions.
  • M
    Maria Schneider DDSJul 30, 2025
    Why does my Cotech Weather Station display show precipitation when it's not raining?
    • M
      michael47Jul 31, 2025
      If your Cotech Weather Station display indicates precipitation when it is not raining, ensure the rain gauge is mounted in a stable manner. If the gauge is not properly fitted (e.g. attached to an unsteady mast), the sensor can transmit incorrect values.
  • C
    carterstephenAug 4, 2025
    Why does Cotech Weather Station temperature sensor show daytime values that are too high?
    • M
      michelle89Aug 4, 2025
      If your Cotech Weather Station's temperature sensor shows daytime values that are too high, ensure the thermometer/hygrometer is mounted in a location shaded from the sun. If possible, mount the sensor in a north-facing direction.
  • M
    Mr. Larry SchmidtAug 9, 2025
    What to do if Cotech FT0203 Weather Station indoor and outdoor sensors show different values?
    • N
      Nicholas BautistaAug 9, 2025
      If the indoor and outdoor sensors of your Cotech Weather Station show different values, allow the sensors to stabilise for up to 1 hour. The temperature values should be within 1 °C (accuracy ±0.5 °C) and the humidity values should be within 6 % (accuracy ±3 %). Where necessary, adjust the sensors in the indoor unit (see the Calibration section).
  • K
    Kevin BarronAug 14, 2025
    How to fix poor display contrast on Cotech FT0203 Weather Station?
    • T
      tjohnsonAug 15, 2025
      If the contrast of the display on your Cotech Weather Station is poor, replace the batteries in the unit.
  • D
    David RodriguezAug 19, 2025
    Why doesn't the background lighting change colour as expected on my Cotech Weather Station?
    • J
      jillwagnerSep 12, 2025
      If the background lighting on your Cotech Weather Station does not change colour as expected, check the settings (see the Settings/adjustments section). If the background lighting is to reflect the outdoor temperature, ensure that the outdoor sensor is set to channel 1.

Summary

Safety Information

Keys and Functions

Installation Guide

Inserting Batteries

Instructions for inserting batteries into the weather station sensors and indoor unit.

Anemometer Installation

Steps to install and power the anemometer sensor unit.

Sensor Installation

Rain gauge Installation

Instructions for installing and powering the rain gauge sensor.

Thermometer;hygrometer Installation

Instructions for installing and powering the thermometer/hygrometer sensor.

Indoor unit power options

Guide for powering the indoor unit via batteries or mains adapter.

Sensor Functionality Check

Settings and Adjustments

Time, date, and units setup

Configure time format, date order, and measurement units for display.

Histograms, Weather Forecast, and Moon Phases

Alarm System

Displaying threshold values

Setting alarms

Guide to setting up and activating alarms for various measurements.

Alarm Categories and Settings

Sensor Calibration

Calibrating temperature

Steps to recalibrate temperature readings for indoor and external sensors.

Calibrating humidity

Steps to recalibrate relative humidity readings for indoor and external sensors.

Calibration of Other Sensors

Final Mounting and Placement

Choosing sensor location

Transmission Range Problems

Sensor Mounting

Rain gauge mounting

Thermometer;hygrometer mounting

WeatherHome Software

System requirements

Software installation

Step-by-step guide for installing the WeatherHome software from the CD.

Using WeatherHome Software

Software interface and menus

Software settings configuration

Viewing Recorded Data

Database and Memory Management

Troubleshooting Guide

Technical Specifications

Sensor data and accuracy

Cotech FT0203 Specifications

General IconGeneral
BrandCotech
ModelFT0203
CategoryWeather Station
Humidity Resolution1%
Power (Main Unit)2 x AA batteries (not included)
Power (Remote Sensor)2 x AAA batteries (not included)
DisplayLCD
Indoor Temperature Range0°C - 50°C
Temperature Resolution0.1°C
Wireless Range30 m
FeaturesIndoor/Outdoor temperature and humidity, calendar
Power SourceBattery
Humidity Range20% - 95%

Related product manuals