Cotech FT0203 User Manual

31
ENGLISH
Unit Set units of measurement.
Display Display settings for Time and Date, Graphs, Pressure, Rainfall periods,
etc., and options for therolling display of external temperature/
humidity sensors (Channel Circle).
Backlight Turn thebackground lighting on or off (Auto). Set thebrightness of
thelighting (Bright). Select whether thecolour should be fixed
or if it should change to reflect thecurrent outdoor/indoor
temperature (Color By). Set thecolour scale (Color Index, Indoor
Temperature/Outdoor Temperature) – see theSettings/adjustments
section.
Forecast Adjust thethreshold values for weather forecasts and storm warnings
(see theSettings/adjustments section).
Record Interval Install theinterval for recordings.
Max/Min Select whether theweather station’s max/min values are to be reset
automatically at theend of each day (Daily) or if they are to be reset
manually (History).
Buzzer Select whether thesound (for key presses and alarms) shall be on or off.
Set the alarm (Alarm)
Set thealarm thresholds and activate/deactivate alarms. Make any desired changes
and then click on [ Save ] to implement thechange, or [ Cancel ] to leave without saving.
In theexample shown, theindoor unit will emit analarm if theoutdoor temperature
exceeds 30°C, if theaverage wind speed exceeds 5m/s, or if theprecipitation during
one daily period exceeds 50mm.

Cotech FT0203 Specifications

General

Brand	Cotech
Model	FT0203
Category	Weather Station
Language	English