Cotech FT0203 User Manual

29
ENGLISH
Software (WeatherHome)
TheWeatherHome software allows you to use acomputer to (e.g.) view measurement
data in real time, adjust settings for theindoor unit, set alarms, and reset max/min values.
System requirements
Computer PC with CD drive and USB port
Operating system Windows NT4 (Service Pack >= 6a), Windows 2000,
Windows XP, Windows Vista, Windows 7−10
Processor Pentium III 500 MHz or higher
Memory at least 128MB, recommended 256MB
Installation
1. Use theprovided USB cable to connect
thecomputer to theUSB port on theindoor unit.
2. Make sure that you have administrator rights for
your operating system.
3. Insert theprovided CD into your computer’s CD
drive. If theinstallation program does not start
automatically: open thefile manager (explorer),
localise theCD, and run WeatherHome.exe.
4. Follow theinstructions in theprogram to install
WeatherHome.

Cotech FT0203 Specifications

General

Brand	Cotech
Model	FT0203
Category	Weather Station
Language	English