7
Crane Electronics Ltd
The force in torque management
Crane Electronics Ltd
Watling Drive
14 88
-electronics.com
Measurement Modes:
Track – Real time torque
Peak – Capture of the highest torque
Pulse – Special measurement algorithm for use with impulse tools, incorporating pulse count
Click – Special measurement algorithm for use with click tools
Force – Capture of peak force during cycle
Audit – Special measurement algorithm that measures torque after joint moves a certain angle
Yield – Special measurement algorithm that measures torque after joint goes into yield (Pro only)
MoveOn – Special measurement algorithm that measures torque of previously tightened joint (Pro only)
Retightened – Special measurement algorithm that untightens a fastened joint and retightens to the same
angle (Pro only)
Measurement Units:
Torque – Nm, lbft, lbin, MNm, Ncm, kgcm, kgm, kNm, klbft, Nmm, ozin
Force – kg, kkg, lb, klb, N, kN
Physical Measurements:
Auto Bi-directional torque; angle*; pulse count; RPM in track mode*; cycle time duration (*when using rotary
transducer).
Compatible Input Devices:
IS, UTA, and Multi, including WrenchStar Multi, cable products compatible, analogue or digital.
Plug & Play Transducer Data:
Auto ID of all Crane UTA/Multi products. The following information is read from the chip in the transducer -
torque range, angle encoder data, serial number, calibration due date.
Data Storage:
999 readings in ‘Check’ and 20,000 readings in ‘Jobs’.
Basic Statistics:
Count, range, mean, min, max, standard deviation.
Advanced Statistics:
Cm, Cmk, Cp, Cpk
Auto Print / Data Output:
Easy selectable output to AutoPrint or CSV. Interface to simple PC package that outputs the print data to an
Excel spreadsheet.
Cycle Status Indication:
Audible buzzer and LED HI/OK/LO torque status. User definable.
Operating Languages:
English, Chinese, Czech, French, German, Italian, Spanish, Swedish, Polish, Portuguese, Turkish
To Next Page
Loading...
