8
Crane Electronics Ltd
The force in torque management
Crane Electronics Ltd
Watling Drive
14 88
-electronics.com
Construction:
High strength injection moulding. Protective rubberised trim to alleviate secondary damage. Soft rubber trim
surrounding tough internal chassis. Can survive 1.8m drop.
Display:
Colour Backlit 4”screen (86mm x 52mm)
Keypad:
Easy clean keypad. 11 Keys including 5 function keys, 5 soft directional keys and on/off key.
Power:
Universal 5V charger or USB charger.
Power Management:
User selectable auto power-off: Between 0 - 200 minutes. Screen contrast and brightness adjustment.
Battery Pack:
Lithium Ion - User swappable. Charge time: 3 hours with appropriate charger current. Chargeable via USB or
5V charger. Typical operating time: 4 hours continuous use.
Input/output ports:
25 pin ‘D’ type transducer port (female) (digital or analogue).
Micro USB (2.0) for power and export.
Standard USB type A (on-the-go).
5V DC power port for use with mains power DC charger.
Zero Stability:
<± 0.01% FSD/ °C.
Static Accuracy:
± 0.25% FSD of connected transducer.
Operating Environment:
Temperature: -20 to +50 °C.
Humidity 10-75% non-condensing.
Ingress protection rating: IP45
.
Torque Measurement
Display to 5 significant figures. Sample every 20 micro seconds.
Angle Measurement:
Quadrature phase input. Display angle to 0.1 degrees, Sample every 1000 micro seconds.
Warranty:
12 months parts and labour against faulty workmanship or materials.
To Next Page
Loading...
