IMPORTANT: To determine which storage racks were built with the base rack and which were not and
other configuration information, refer to the Storage Configuration Document (SCD) shipped with the
system.
Figure 3. SSU Rack Labeling
3.3 Safe Handling and Precautions Check List
Before unpacking the ClusterStor L300 and L300N system, complete this prescribed checklist and observe the
stated precautions.
CAUTION: Read and understand these instructions completely before starting any physical installation
activity.
CAUTION:
● Electro-static Sensitive Devices (ESD)
● Observe all ESD precautions when handling disk drives or components, and avoid touching the
printed circuit boards.
Prerequisites to Installation
12
To Next Page
Loading...
