Need help?Do you have a question about the Cray ClusterStor L300 and is the answer not in the manual?
General| Form Factor | Rack-mounted |
|---|---|
| Data Protection | RAID, Erasure Coding |
| Scalability | Highly scalable |
| Interface | InfiniBand, Ethernet |
| Storage Type | HDD and SSD |
| Operating System | Linux-based |
Defines the target audience and scope of the installation guide.
Explains formatting conventions used in the document for clarity.
Details the process for acclimating system cabinets to the environment before installation.
Provides key physical specifications for system racks, including weight and dimensions.
Specifies the minimum required space around the rack for safe installation and servicing.
Guides users on planning the optimal placement and order of racks during installation.
Provides essential safety guidelines and precautions for handling system components.
Step-by-step instructions for safely removing the rack from its shipping crate.
Detailed steps for safely moving the rack to its designated installation location.
Describes the manual process for installing individual disk drives into enclosures.
Outlines the use of a speedloader device for faster installation of multiple disk drives.
Instructions for installing disk drives in a 2U24 enclosure, primarily for reference.
Guides on how to reset a tripped circuit breaker on the system's power distribution unit.
Details the procedure for resetting circuit breakers on a Raritan PDU.
Illustrates typical rack layouts and component IP address assignments for system configurations.
Details recommended port usage for 24-port management switches in inter-rack LMN connections.
Details recommended port usage for 48-port management switches in inter-rack LMN connections.
Explains how to connect SMUs to InfiniBand LDN and LMN switches using 24-port configurations.
Details connecting SMUs to InfiniBand LDN and LMN switches using 48-port configurations.
Guides on cabling SMUs for 40GbE LDN and LMN networks with 24-port switches.
Explains SMU cabling for 40GbE LDN and LMN networks using 48-port switches.
Details connecting SMUs for Omni-Path LDN and LMN networks with 24-port switches.
Guides on cabling SMUs for Omni-Path LDN and LMN networks with 48-port switches.
Explains SMU cabling for 48-port Omni-Path LDN and LMN networks with 24-port switches.
Details SMU cabling for 48-port Omni-Path LDN and LMN networks with 48-port switches.
Guides on cabling SMUs for 100GbE LDN and LMN networks with 24-port switches.
Explains SMU cabling for 100GbE LDN and LMN networks with 48-port switches.
Lists the necessary system access and user privileges for powering on the system.
Step-by-step instructions for powering on the ClusterStor L300 and L300N system.
Guides on setting the initial administrator password for the system's management interface.
Details configuring IP addresses, DNS, NTP, and MTU for Lustre network interfaces.
Provides solutions for errors encountered during Lustre network interface configuration.
Outlines the process for running basic and performance tests on the Lustre file system.
Specific procedure for running validation tests when Lustre is not mounted.
Offers solutions for issues encountered during Lustre validation tests.
Describes how to view the progress of configuration and validation tests.
Explains how to review and confirm the final configuration status and system readiness.
Covers methods for authenticating Lustre users, including AD, LDAP, NIS, and Local.
Details configuring Lustre user authentication using Active Directory.
Explains how to configure Lustre user authentication using LDAP.
Guides on setting up Lustre user authentication using NIS.
Describes how to configure Lustre user authentication using local user accounts.
Provides solutions for errors related to Lustre user authentication configuration.
Procedures for verifying the system's operational status after installation and configuration.
Describes how to test mounting the Lustre file system from a client.
Details the process of configuring an external SMTP relay for email notifications.
Explains how to add, delete, and manage users for receiving system email notifications.
Covers enabling and verifying the service console for remote access and support.
Provides information on configuring an additional MMU for Lustre Distributed Namespace (DNE) feature.
Step-by-step guide to powering off the system using the CSCLI.
Instructions for powering off the system using the CSSM interface.
Provides reference information on internal rack cabling based on the SCD.
Details the physical and logical port numbering for SMU components.
Explains the physical and logical port numbering for MMU components.
Guides on cabling AMMU SAS 1U servers for specific system requirements.
Details the physical and logical port numbering for SSU components.
Covers internal rack cabling for the Local Management Network (LMN).
Provides information on internal rack cabling for the Local Data Network (LDN).
Guides on cabling an optional additional MMU for enhanced file system capabilities.
Details the cabling of SSU ESU SAS ports for extending storage capacity.
Explains how to cable AMMU networks for Lustre Distributed Namespace (DNE).
Provides descriptions of various system components.
Describes the function and types of Embedded Application Controllers (EACs).
Details the Operator Control Panel (OPS) for the 5U84 enclosure, including LEDs and display.
Explains the Operator Control Panel (OPS) for the 2U24 enclosure, including LEDs.
Presents diagrams illustrating power distribution configurations for various rack models.
To Next Page
