13
Perform the First-Run Configuration
About this task
After the ClusterStor L300 and L300N system is installed and powered on, launch CSM wizard and perform the
first-run configuration procedures. After all the procedures are complete, the ClusterStor L300 and L300N system
is fully configured for the customer environment and ready for use.
IMPORTANT: Throughout the first-run configuration procedure, the Next button must be clicked on a
number of screens. Do not click Next too quickly from one screen to the next, or the configuration
procedure may fail.
Procedure
1. To launch CSM wizard, Open a Java-enabled browser (Google Chrome preferred).
2. Enter the CSM wizard IP address in the browser's URL field.
The CSM wizard launches and provides prompts to perform the first-run procedures, beginning with entering
the default login and password.
3. Enter the factory-set user name admin and login admin.
The factory login is admin and default password is admin.
13.1
Create the Administrator Password
Prerequisites
System is on and the CSM wizard is launched.
If the Site Prep questionnaire was filled out as part of the purchase, much of the necessary information in this
procedure will be pre-populated.
About this task
When CSM launches for the first time, the Welcome screen appears, and prompts for the administrator admin
password. This prompt no longer appears after the administrator password is set.
Perform the First-Run Configuration
65
To Next Page
Loading...