[nxxx]$ sudo mdraid-activate -d -m
or
[nxxx]$ sudo bash -x mdraid-activate -d -m
(The second command provides more information.)
2. Check to see if any hard drives have failed:
[nxxx]$ sudo dm_report
Review the output for the failed drive (see slot 16 in the sample output below):
[admin@n005 ~]$ sudo dm_report
Diskmonitor Inventory Report: Version: 1.0.x.1.5-16.x.2412 Host: fgbe05
Time: Fri Mar 14 14:10:38 2014
encl: 0, wwn: 50050cc10c4002c8, dev: /dev/sg90, slots: 84, vendor: XYRATEX , product_id: ,
dev1: /dev/sg1 slot: 0,
wwn: 5000cca01b4dff08, cap: 2000398934016, dev: sdbd, parts: 0, status: Foreign Arrays, dev1:
sdej, t10: 11100111120
slot: 1, wwn: 5000cca01b4dbc24, cap: 2000398934016, dev: sdbb, parts: 0, status: Foreign
Arrays, dev1: sdeh, t10: 11100111120
slot: 2, wwn: 5000cca01c4bfbe8, cap: 2000398934016, dev: sdei, parts: 0, status: Foreign Arrays,
dev1: sdbc, t10: 11100111120
slot: 3, wwn: 5000cca01b38b8a4, cap: 2000398934016, dev: sdek, parts: 0, status: Foreign Arrays,
dev1: sdbe, t10: 11100111120
slot: 4, wwn: 5000cca01c4bd708, cap: 2000398934016, dev: sdef, parts: 0, status: Foreign Arrays,
dev1: sdaz, t10: 11100111120
slot: 5, wwn: 5000cca01c4c5314, cap: 2000398934016, dev: sdeg, parts: 0, status: Foreign Arrays,
dev1: sdba, t10: 11100111120
slot: 6, wwn: 5000cca01c4ade98, cap: 2000398934016, dev: sddx, parts: 0, status: Foreign Arrays,
dev1: sdar, t10 11100111120
slot: 7, wwn: 5000cca01c4af0d0, cap: 2000398934016, dev: sdax, parts: 0, status: Foreign Arrays,
dev1: sded, t10: 11100111120
slot: 8, wwn: 5000cca01c4c32e8, cap: 2000398934016, dev: sdee, parts: 0, status: Foreign Arrays,
dev1: sday, t10 1110011112
slot: 9, wwn: 5000cca01b4ac9a8, cap: 2000398934016, dev: sddy, parts: 0, status: Foreign Arrays,
dev1: sdas, t10 11100111120
slot: 10, wwn: 5000cca01c4aef90, cap: 2000398934016, dev: sdeb, parts: 0, status: Foreign
Arrays, dev1: sdav, t10: 11100111120
slot: 11, wwn: 5000cca01c4c96cc, cap: 2000398934016, dev: sdec, parts: 0, status: Foreign
Arrays, dev1: sdaw, t10: 11100111120
slot: 12, wwn: 5000cca01b4abb54, cap: 2000398934016, dev sddz, parts: 0, status: Foreign Arrays,
dev1: sdat, t10 11100111120
slot: 13, wwn: 5000cca01b4abbc8, cap: 2000398934016, dev: sdea, parts: 0, status: Foreign
Arrays, dev1: sdau, t10: 11100111120
slot: 14, wwn: 5000cca01c4c0284, cap: 2000398934016, dev: sdfl, parts: 0, status: Foreign
Arrays, dev1: sdcf, t10: 11100111120
slot: 15, wwn: 5000cca01c4b9984, cap: 2000398934016, dev: sdfj, parts: 0, status: Foreign
Arrays, dev1: sdcd, t10: 11100111120
slot: 16, wwn: 5000cca01c4c34f4, cap: 2000398934016 dev: sdfk, parts: 0, status: Failed, dev1:
sdce, t10: 11100111120
slot: 17, wwn: 5000cca01b4ce748, cap: 2000398934016, dev: sdfm, parts: 0, status: Foreign
Arrays, dev1: sdcg, t10: 11100111120
slot: 18, wwn: 5000cca01c4c3574, cap: 2000398934016, dev: sdfh, parts: 0, status: Foreign
Arrays, dev1: sdcb, t10: 11100111120
T10_key_begin:
GRD_CHK(1), APP_CHK(1), REF_CHK(1), ATO(1), RWWP(1), SPT(1), P_TYPE(1), PROT_EN(1), DPICZ(1),
FMT(1), READ_CHK(1)
T10_key_end
End_of_report
Perform the First-Run Configuration
71
To Next Page
Loading...
